ozone water bar for ch1,ch2,ph2

On buggies, snowboards, skis, etc.

ozone water bar for ch1,ch2,ph2

Postby idscasper » April 10th, 2014, 1:17 pm

Hi folks. Is there any problem using ozone water bar en these kites? Of course with straight lines. No V, no Y
idscasper
 
Posts: 15
Joined: June 29th, 2010, 9:36 pm

Re: ozone water bar for ch1,ch2,ph2

Postby tungsten » April 11th, 2014, 5:40 am

I don't know the ozone bar in particular, but you can use ARCs with any 4 line bar with single line safety. It should have 50+cm of throw (depower line length). Here are the specs for front line vs. back line length (at the bottom of the document), if the ozone is different, add pig tails:

http://myweb.tiscali.co.uk/mx5alan/arcs ... up_FAQ.htm

good winds, tungsten
tungsten
 
Posts: 483
Joined: March 22nd, 2010, 8:19 am

Re: ozone water bar for ch1,ch2,ph2

Postby idscasper » April 13th, 2014, 10:13 pm

Thank you, lots of info there.
My main concern was about straight lines or Y or V lines.
idscasper
 
Posts: 15
Joined: June 29th, 2010, 9:36 pm

Re: ozone water bar for ch1,ch2,ph2

Postby Hardwater Kiter » April 8th, 2015, 12:09 pm

V lines work better with arcs. The Ozone bar uses a front line flag out which also works best with arcs.

The bar throw is a little short IMO but usable. No shorter than pre Navi bar.
"The rider makes the kite."
Owner/instructor @ http://www.hardwaterkiter.com
User avatar
Hardwater Kiter
 
Posts: 349
Joined: July 8th, 2010, 3:39 pm
Location: Cow Hampshire


Return to On the Land

Who is online

Users browsing this forum: No registered users and 1 guest

cron